Output Voltage: 12V
DC Jack Type: 5.5 Barrel Connector
Wire Length: 147.3cm(58in)
Output Power: 36W (3A)
Input Frequency Range: 50~60Hz
Input Voltage AC: 100~240V
Power Supply Type: Compact
Standards & Certifications: CE/UL ListedÂ
CONNECTION DIAGRAM:
ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE：
What are the difference between waterproof IP65, IP67 and IP68 ?
1:Non-waterproof LED Strip:Â PCB (Printed Circuit Board) with 3M self-adhesive back.--(For Indoor).
2:Waterproof LED Strip--Surface Injection  IP65: PCB surface is encapsulated with plastic Gel, with self-adhesive 3M back, --(For Outdoor & Indoor).
3:Waterproof LED Strip--Silicon Tube IP67:Â PCB is encapsulated with silicon tube, with plastic fastener,better waterproof, --(For Outdoor).
4:Waterproof LED Strip--Whole Injection IP68:Â PCB both surface and back are encapsulated with plastic Gel, with plastic fastener, top level of waterproof, --(For Outdoor).
APPLICATION：
Decorative lighting in cafes.
Festival decorative lightings.
Furniture lightings.
TRANSFORMERS:
In addition to your colour changing LED Strip Lights, you will also need a 12v power supply, which is sold seperately. Our power supplies are available in a "plug and play" and mains ready format. A single driver can be used to run multiple strips. The size of our power supplies and the corresponding length of strip light they can be used to power are as follows:
PLEASE REMEMBER:
3528 SMD (300LEDs)  24W/5 meters,  so you need  at least 2 amp 24W led power supply, we recommend 3 amp 36W led power supply.
3528 SMD (600LEDs)  48W/5 meters,  so you need  at least 4 amp 48W led power supply, we recommend 5 amp 60W led power supply.
5050 SMD (150LEDs)  36W/5 meters,  so you need  at least 3 amp 36W led power supply, we recommend 4 amp 48W led power supply.
5050 SMD (300LEDs)  72W/5 meters,  so you need  at least 6 amp 72W led power supply, we recommend 8 amp 96W led power supply.
It is not recommended to power more than 5 meters of LED Strip Light in series from a single driver. For longer lengths, strips will need to be connected in parallel from the same driver.
CUTTING AND SOLDERING:
We currently offer free cutting and soldering on all LED Strip Lights. If you require cuts, let us know. Send us your meaurements using the 'specific requirements' box above or by contacting us directly.
Please note: Unless otherwise stated, all LED Strip Lights will be supplied in one continuous length. For example, an order for 3 metres will be supplied as one length and not as 3 separate 1 metre lengths. Also, if you have ordered more than 5m and have not specified any cuts, we will send your order in 5m rolls and parts there of. For example, an order for 20 metres will be supplied as four 5m rolls.Â
Unfortunately, we cannot accept returns on made-to-measure items.
ALUMINIUM PROFILES:
To maintain the life and high efficiency of the LEDs the LED Strips should be mounted directly onto a heat conducting surface, such as aluminium, to dissipate heat. LEDs don't produce much heat compared to traditional lighting, but the heat produced needs to be managed, or the LEDs may overheat and be damaged with loss of light output. We recommend aluminium profiles to dissipate the heat. Â
